Rocker arm

In cars with an underhead camshaft, you will find a rocker arm. The rocker arm transfers the camshaft's movement to the intake valves. The rotating motion of the camshaft is converted into a vertical movement using a lever effect. The camshaft has oval lobes, which push against the pushrod, causing it to move up and down. This pushrod then presses against the rocker arm, which opens the valve.

Defective rocker arm

If a rocker arm is defective, it must be replaced. A broken rocker arm will no longer open the valves properly, causing incorrect valve timing, resulting in power loss and increased fuel consumption.

There are several symptoms that can indicate a defective rocker arm:

Power loss: A defective rocker arm causes the intake valve's timing to be off. Correct timing is crucial for the intake and exhaust of air in the combustion chamber. The right amount of air at the right time ensures engine power.
A stuttering engine: If valve timing is off due to a defect, you may notice a stuttering engine.
A fast ticking noise: This sound is most noticeable when starting and stopping the car.
The engine warning light is on: If there is a defect in one of the engine components, the dashboard warning light will illuminate.

Check the rocker arms if you recognise any of these symptoms. A crack or break in the rocker arm clearly indicates a fault, but if you notice metal debris under the rocker arm, this also signals a defect. You can compare the rocker arms to identify the problem.

Replacing a rocker arm

Is the rocker arm defective and do you want to replace it? You can do this job yourself. To replace it, you will need a ratchet, masking tape, and a new rocker arm.

Here?s how to replace a rocker arm:

1. Before starting, disconnect the negative cable from the battery to avoid short circuits during the replacement.

2. Next, remove the air filter and unplug the spark plug wires. Mark the spark plug wires with masking tape to ensure correct reassembly.

3. Then, detach the throttle cables from the throttle body. Remove the valve cover and the valve cover gasket.

4. Once everything has been removed and unscrewed, you can loosen the rocker arm nuts and remove the rocker arm.

5. Install the new rocker arm and tighten the bolts with a torque of 30 Nm using a torque wrench.

6. Then, reinstall the valve cover with a new gasket and reconnect the cables to the throttle body and the spark plugs.

7. Finally, reinstall the air filter and reconnect the negative cable to the battery.

Having your rocker arm replaced at a garage? Order the parts affordably at Winparts and supply them yourself, saving significantly on costs.

Buy rocker arms

Buying a rocker arm is quick and affordable at Winparts. Enter your registration number or car details on the website to find the correct parts. At Winparts, you can also find other engine components such as cylinder heads, oil pans, and intake manifolds.

Fit guarantee, show parts suitable for your vehicle.

Enter your number plate or Manually select.

Rocker arm

The rocker arm opens the intake valve of the engine. The rocker arm is driven by the camshaft. It converts a rotating motion into a vertical movement using a lever effect. The rocker arm rocks back and forth, controlled by the camshaft and valve spring. The rocker arm is subject to wear and will need replacement if defective. A damaged rocker arm can cause incorrect valve timing, leading to power loss and high fuel consumption. You can find a new rocker arm at Winparts. Enter your vehicle registration or car details on the website to find the right parts.

61 - 80 / 570 Products

Filter

0 filters selected