Samsung Galaxy Tab A7 Lite Active Holder with Fixed Power Supply

Active holder for fixed installation
With USB cable. 2 USB ports: QC 3.0A + 2.4A. With tiltable rotary knob. 12/24 Volt. 2A charging.
Keep your battery fully charged in an active holder, always within reach! Neat, discreet and practical. Custom-made with a perfect, secure fit. For fixed installation. The holder is plugged into the dashboard, which provides an elegant installation without any cables hanging over the interior. The charging box has two USB ports: QC 3.0A + 2.4A. It is easy to slide the device into place in the holder, so that it is connected to the charger, and to remove it from the holder when leaving the vehicle.
The holder is equipped with a tilt swivel so you can easily adjust the angle for a better view. Can tilt 17° and rotate 360°. Mounting plate 42x50mm with 4mm AMPS holes. Made of high quality black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended.
Tablets (surf pads) must not be installed on the dashboard of a car if they block the view or the most important controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices such as mobile phones and GPS devices, ProClip is not designed for large devices such as tablets. In some vehicles, ProClip has an extra secure fit and can therefore also be used for tablet installation. If you want to mount a tablet on the dashboard of the car, each tablet-car combination should be examined in detail by you to determine whether such an installation is possible in the specific case. The position and how firmly the ProClip sits in place must be taken into account, as well as the size of the tablet you want to use. Brodit does not provide recommendations for such installations.
An installation of a tablet on the dashboard of a vehicle is always at the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed on a Brodit headrest mount
Charging specification:
- Molex 2-pin input
- Output Connector Type: Dual USB Type-A Female.
- Output voltage: 5V, 9V, 12V (nominal)
- Output current:
- USB Port 1: 3.6V~6V/3A 6.2-9V/2A 9.2-12V/1.5A (Recommended for Android etc.)
- USB Port 2: 4.9V ~ 5.25V 2.4A (Recommended for Apple)
- Output voltage ripple: 300mV pk-pk at maximum load
- Input voltage range: DC 12--24V DC, input can handle 40V Load dump translent events
- Input Current: 3.0A DC Max
- Input current without connected device: 0.005A
- DC-DC conversion efficiency: more than 86% typical
- Nominal power:
- USB port 1: 18 Watt Max.
- USB port 2: 12 Watt Max.
Item No.: 727264
EAN: 7320287272642
Width: 200 mm
Height: 145 mm
Depth: 44 mm
Capacity: 1276 cm³
Weight: 384 grams
Item no. 727264 fits:
Samsung Galaxy Tab A7 Lite SM-T220 (For all countries)

Suitable for:
Active solid food
Samsung GALAXY TAB A7 Lite

---

application	Universal
Assembly	Bolted
Warranty	2 years